[Oct 14, 2022] 1Z0-1079-21 Exam Dumps, 1Z0-1079-21 Practice Test Questions
Free 1Z0-1079-21 Study Guides Exam Questions and Answer
Oracle 1Z0-1079-21 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 7 |
|
| Topic 8 |
|
| Topic 9 |
|
NEW QUESTION 33
Which two statements aretrue about authority configuration in Global Trade Management (GTM)? (Choose two.)
- A. Authority configuration involves defining the Authority ID, Name, and Description.
- B. An authority has to be linked to a region by using region configuration.
- C. There can be only one authority defined for a domain in GTM.
- D. An authority has tobe defined in the PUBLIC domain.
- E. Authorities are regulatory agencies, such as the US Bureau of Industry and Security.
Answer: A,E
NEW QUESTION 34
Which two statements about shipment statuses are true? (Choose two.)
- A. ENROUTE_ENROUTE - indicates that the shipment is moving from one location to another.
- B. ENROUTE_UNLOADED PARTIAL - indicates that the shipment has reached the final destination and is in the process of being unloaded.
- C. ENROUTE_DIVERTED - indicates that the shipment was delayed in leaving the previous locationdue to the late pickup time, and will be late arriving to the destination location.
- D. ENROUTE_NOT STARTED - indicates that the shipment has not been picked up from the initial pickup stop yet.
- E. ENROUTE_DELAYED - indicatesthat the shipment was unable to travel on the planned route, and has taken a detour.
Answer: A,D
NEW QUESTION 35
Which three statements are true when setting up Match Rules for Freight Payment in OTM? (Choose three.)
- A. BM or Bill Of Lading is a mandatoryshipment reference number qualifier to match to.
- B. You need to specify at least one shipment reference number qualifier to match to.
- C. The match rule will apply to all invoices, unless only certain service providers are specified on the match rule.
- D. The matching rule could be different for different service providers.
- E. You could specify several shipment reference values to match to.
Answer: A,B,D
NEW QUESTION 36
If a Rate Record and a Rate Offering are configured with conflicting values in the same data elements, how does OTM address this?
- A. During planning, the user will have the option of indicating if OTM should prioritize either the Rate Offering or the Rate Record setting.
- B. Such a conflict cannot exist in OTM.
- C. The Rate Record will take priority over the Rate Offering configuration.
- D. OTM's planning engine will run the solver for both settings, but only consider the least costresult.
- E. The Rate Offering will takepriority over the Rate Record configuration.
Answer: B
NEW QUESTION 37
Which option represents Original Invoice Cost field at Shipment?
- A. The Initial invoice amount received from the carrier
- B. Total Actual Cost minus the rebate amount as defined in the Secondary Charge Rules
- C. Total Approved Cost on a sell Shipment
- D. Contains the initial invoiceamount adjusted by any additional charges or invoices that the carrier later sent to you
Answer: A
NEW QUESTION 38
Which business object do you use to set up the details of the classification data that you want to download and configure how it is mapped from the content provider's data to the Global TradeManagement (GTM) data structure?
- A. Content Source
- B. Data Load Type
- C. Product Classification Category
- D. External System
Answer: D
NEW QUESTION 39
Which two statements are true with respect to userID and domain relationship, during a standard OTM installation? (Choose two.)
- A. The ADMIN userID is created in the DBA domain.
- B. The GUEST userID is created in the PUBLIC domain.
- C. The ADMIN userID is created in the GUEST domain.
- D. TheGUEST userID is created in the SERVPROV domain.
- E. The DEFAULT userID is created in the ADMIN domain.
Answer: A,E
NEW QUESTION 40
Your customer has implemented OTM and has a requirement to have a selected menu to be displayed separately.
How should youassign this to a user?
- A. Assign it via Manage User Access.
- B. It is a customization that OTM does not support.
- C. Assign it in User Role ID.
- D. Assign it in User Preference and assign this preference to User.
Answer: A
NEW QUESTION 41
Your customer has US and German orders.
How do you set up a User role in Global Trade Management (GTM) with read/write access for US orders, and only read access for German orders?
- A. Access can be controlled by using VPD profile along with External Predicates.
- B. Access can be controlled by using Access Control List and assigned to User Role.
- C. Assign multiple User Roles whilecreating the user.
- D. Assign multiple User Role grants in User Role.
Answer: C
NEW QUESTION 42
After executing the Approve Multiple Invoicesfunction, Oracle Transportation Management displays an Approve Invoice results page.
Which four invoice values are displayed on this results page? (Choose four.)
- A. Shipment ID
- B. Voucher ID
- C. Invoice ID
- D. Approval Status
- E. Service Provider ID
- F. Amount to Pay
Answer: A,B,C,F
NEW QUESTION 43
Select the two true statements about OTM Agents. (Choose two.)
- A. Agents "listen" for a condition to occur.
- B. Agents can send alerts when a condition has occurred, but they cannot create or change data objects.
- C. Agents can send alerts when a condition has occurred, and they can also create or change data objects.
- D. Agents can be configured to run multiple times on a time-based schedule.
Answer: B,D
NEW QUESTION 44
When defining a Region, there is a parameter called "Representative Location".
When is it appropriate to set a value for "Representative Location"?
- A. Do it when you want to create a template Region that you can use to quickly create other regions in the future.
- B. Representative Location is the locationof the person assigned to the LOGISTICS Role for the region.
- C. Do it if you are using Cooperative Routing and you want the location to be considered in the cooperative routing aggregation.
- D. Use this parameter to define a range of values that will be included in the region you are defining, such as a range of zip codes.
Answer: A
NEW QUESTION 45
Which four of the following components make up a Compliance Rule in Global Trade Management (GTM)?
(Choose four.)
- A. Region
- B. Commerce Control List
- C. Control Code
- D. Regime
- E. Control Type
Answer: A,C,D,E
NEW QUESTION 46
Which are the two ways inwhich Milestones differ from Agents? (Choose two.)
- A. Milestones may be both "reactive"(for example, they monitor for a condition to occur) and "proactive" (for example, they can initiate before, at, or a prescribed number of times after a condition occurs).
- B. Agents monitor for a condition to occur, whereas Monitors only start and stop based on a time-based schedule.
- C. Milestones monitor for a condition to occur, whereas Agents only start and stop based on a time-based schedule.
- D. Agents may be made up of one or more Milestones.
- E. Milestones may be made up of one or more Agents.
Answer: A,E
NEW QUESTION 47
You are writing an agent to be triggered when an Order Release Update is received via integration. You would like the agent to check if the Order Release is on a shipment and if it is, you want OTM to only update the Order Release.
Which option will achieve this?
- A. You can use an agent saved condition to identify OR ON SHIPMENT and use the ORDER RELEASE - MOD - NO PROCESSING agent action.
- B. You can use an agent saved condition to identify OR ON SHIPMENT and use the ORDER RELEASE - MOD - FULL IMPACT action.
- C. You can use an agent saved condition OR ON SHIPMENT and use the ORDER RELEASE - MOD - NO PROCESSING action.
- D. You can use an agent saved condition to identify OR ON SHIPMENT WITH RESOURCES TENDERED/ SECURED and use the ORDER RELEASE - MOD - NO PROCESSING agent action.
- E. You can use an agent saved condition to identify OR ON SHIPMENT and use the ORDER RELEASE - MOD - FUTURE PROCESSING agent action.
Answer: D
NEW QUESTION 48
Select the three business objects that can be managed using the Fleet Management module. (Choose three.)
- A. Fleet power units
- B. Driver payroll
- C. Driver time off, sick time, vacations, etc.
- D. Driver work hours
- E. Fleet equipment
Answer: B,C,E
NEW QUESTION 49
View the exhibit.
Bob is a user in the "3PL COMPANY"domain and has been assigned the "Admin" User Role ID.
What must you do to make sure that Bob has the authority to view and plan all the orders from all the Client domains shown?
- A. Use OTM's VPD to add Bob to the Planner Role in the 3PL COMPANY domain.
- B. Use OTM's VPD to assign Bob's user ID in each of the Client domains.
- C. Create a Role in the 3PL COMPANY domain that has at least "Default" authority, and use OTM's GRANTS to assign Bob's user ID in each of the Client domains.
- D. Do nothing, because Bob will automatically be authorized to plan all of the orders.
- E. Create aRole in each of the Client domains with the same name, and add Bob's user ID to the Role.
Answer: C
NEW QUESTION 50
When assigning rules to service providers to support Freight Payment, which two statements are true? (Choose two.)
- A. The Autopay check box should be selected for the rules to apply.
- B. Each service provider can have only one match rule profile assigned.
- C. One can assign a match rule profile and an approval rule profile to a service provider.
- D. The rules cannot be changed once assigned to a service provider.
Answer: A,B
NEW QUESTION 51
Shipment# 10059 is aMulti-Stop shipment with two orders. Both orders are picked up in New York City. One of the orders is dropped off in Philadelphia, Pennsylvania, and the other order dropped off in Baltimore, Maryland. There is empty capacity on this shipment for you to addanother order (# 1234), which is picking up in Philadelphia and dropping off in Baltimore. The status of Shipment# 10059 is "SECURE RESOURCES:
NOT_STARTED"
Which shipment planning option should you use to ensure that order release# 1234 is assigned to Shipment#
10059?
- A. Bulk Plan
- B. Show Routing Options
- C. Manual
- D. Move Order to Existing Shipment
Answer: B
NEW QUESTION 52
When creating a new Declaration type in Global Trade Management (GTM), which three processes may need to be configured depending on the requirements of the local customs authority? (Choose three.)
- A. Define a constraint set with grouping criteria that identifies how tocombine Trade Transactions into a Declaration.
- B. Set up a License Code that defines whether alicense is incremented or decremented for the Trade Transaction.
- C. Set up a data configuration that defines the data required to be copied from the Transaction onto the Declaration.
- D. Create aggregation criteria that consolidate Transaction Lines, based on parameters such as tariff code or country of origin, into fewer lines on the final Declaration.
Answer: B,C,D
NEW QUESTION 53
Given the information:
Which two options are correct for Service Preference configuration? (Choose two.)
- A. If the Data Version ID is not specified and if there is a Restricted Parties List with a Data Version with the "Current" flag set, it will be used for screening.
- B. At the most sixty-four words can be specified in Exclude Words.
- C. It is not mandatory to specify Agency Code.
- D. If the Data Version ID is not specified, then the system will throw an error during screening that Data Version ID needs to be specified.
- E. Exclude Words is used to specify words to exclude when ONLY "Dice"Match Engine is used.
Answer: A,B
NEW QUESTION 54
......
1Z0-1079-21 Exam Dumps, 1Z0-1079-21 Practice Test Questions: https://passguide.validtorrent.com/1Z0-1079-21-valid-exam-torrent.html